Section02MAINTENANCE
Subsection 04 (STORAGE)
NOTE: When available, it is recommended to
use biodegradable antifreeze compatible with
internal combustion aluminum engines. This will
contribute to protect the environment.
NOTE: Theenginewillnothavetorunduringthis
operation but should have been ran before, to ex-
haust as much water as possible, from cooling
system components.
All 2-Stroke Models except DI
NOTE: This procedure requires approximately
2.5 L (2.6 U.S. qt) of antifreeze.
Hose Pinchers Installation
Some hoses have to be plugged to prevent drain-
ing, before filling cooling system jackets with the
antifreeze.
All 2-Stroke Models except DI
Install hose pinchers at the following locations.
1
F17E05A
GTI AND GTI LE MODELS — 717 ENGINES
1. Engine drain hose
F15E01A
1
RFI MODELS — 787 ENGINES
1. Engine drain hose
NOTE: On RFI models, make sure the hose is
properly connected to the magneto cover.
F17E0AB
1
RFI MODELS — 787 ENGINES
1. Fitting properly connected
smr2004-Complete Line Up 43
To Next Page
Loading...
