Section 17 TECHNICAL DATA
Subsection 03 (XP DI MODEL)
PROPULSION XP DI
Propulsion system
BOMBARDIER Formula pump
Jet pump type Axial flow single stage
Impeller rotation (seen from rear) Counterclockwise
Transmission Direct drive
Coupling type Rubber coupling, split FR & RR
Oil type XP-S
TM
synthetic jet pump oil 75W90 GL5
Steering nozzle pivoting angle
20°
Minimum required water level 90 cm (35 in)
Drive shaft deflection (maximum) 0.5 mm (.020 in)
Impeller outside diameter 155.3 mm (6.114 in)
New 0.0 - 0.4 mm (.000 - .016 in)
Impeller/wear ring clearance
Wear limit 1.0 mm (.040 in)
Impeller shaft end play (new) 0
Impeller shaft side play 0.05 mm (.002 in)
Impeller pitch/material Progressive pitch/stainless steel
ADDITIONAL INFORMATION: Do not mix different brands or oil types.
DIMENSIONS XP DI
Number of passenger (driver incl.) 2
Overall length
272 cm (107 in)
Overall width
112 cm (44 in)
Overall height
104 cm (41 in)
Dry weight 274 kg (605 lb)
Load limit (passenger and luggage) 10 kg (22 lb) 181 kg (400 lb)
ADDITIONAL INFORMATION:
CAPACITIES XP DI
Fuel tank (including reserve)
51 L (13.5 U.S. gal)
Fuel tank reserve (from low level signal) 9.8L(2.6U.S.gal)
Oil injection reservoir 4 L (1.05 U.S. gal)
Capacity 100 mL (3.38 U.S. oz)
Jet pump impeller shaft reservoir
Oil level height
Up to plug
ADDITIONAL INFORMATION:
MATERIALS XP DI
Hull Composite
Inlet grate Aluminum
Impeller housing/stator/venturi/nozzle Plastic/plastic/aluminum/aluminum
Air intake silencer Thermoplastic
Flame arrester Tubular wire screen
Steering padding Thermoplastic
Fuel tank Polyethylene
Oil injection reservoir
Polyethylene
Seat Polyurethane foam
ADDITIONAL INFORMATION:
smr2004-Complete Line Up 773
To Next Page
Loading...
Need help?
General
