Extended instructions
9.3 Distributed I/O (PROFINET, PROFIBUS, or AS-i)
S7-1200 Programmable controller
System Manual, V4.2, 09/2016, A5E02486680-AK
407
With DPV1 errors, the DP Master passes on STATUS[4] to the CPU and to the instruction.
Without a DPV1 error, this value is set to 0, with the following exceptions for the RDREC:
● STATUS[4] contains the target area length from RECORD, if MLEN > the destination
area length from RECORD.
● STATUS[4]=MLEN, if the actual data record length < MLEN < the destination area length
from RECORD.
● STATUS[4]=0, if STATUS[4] > 255; would have to be set
In PROFINET IO, STATUS[4] has the value 0.
To Next Page
Loading...
