Technology instructions
10.3 Motion control
S7-1200 Programmable controller
676 System Manual, V4.2, 09/2016, A5E02486680-AK
In the General configuration dialog, you select the
following parameters:
"PROFIdrive" radio button
Unit of measurement
In the Drive configuration dialog, you select the
following parameters:
PROFIdrive drive
Data exchange with the drive
Note: The Maximum speed must be greater
than or equal to the Reference (nominal) speed.
er configuration dialog, you select the
PROFIdrive encoder coupling (for example, a
PROFIdrive encoder on PROFINET)
PROFIdrive encoder
Data exchange with the encoder
Encoder type
Fine resolution
To Next Page
Loading...
