Spectra T50e - Page 108

Chapter 4—Configuring the Library Configuring the Global System Settings
August 2017 User Guide—Spectra T50e Library
109
4. ClickSave.
Note: IfyouenabledSSL,clickOKinresponsetothenotificationabout
resettingthewebserver.Waitforthewebservertoreset
(approximately2to3minutes),andthenlogbackintothe
libraryusinghttps://.
5. ClickMENUtoreturntotheConfigurationmenuscreen.
6. Ifyouchangedthewebportnumber,resetthelibrarytoenablethenew
setting(seeResettingtheLibraryonpage365).Makesurethatthereare
nobackupsrunningbeforeyouresetthelibrary.
Online Access to
Spectra Logic
DisableorenabledisplayinglinkstotheSpectraLogic
websiteatthebottomofeachBlueScalescreenwhenthe
libraryhasaconnectiontotheInternet.
Note: Youdonotneedtoenablethisoptioninorderto
downloadBlueScalesoftwareupdatesdirectlytothe
libraryfromtheSpectraLogicpackageserver.
On
(Enabled)
Email Auto
Configuration Save
EnableordisablesendingtheAutoConfigurationSavefile
toapreviouslyconfiguredmailrecipient.See
BackUpthe
LibraryConfigurationAutomaticallyonpage115for
informationabouttheAutoConfigurationSavefile.
Important: To use this automatic email option, you must
first configure the person to whom you want the backup
file sent as a mail user (see
Configure Mail Users on
page 104).
Note: TheAutoConfigurationSavefileisalways
generated,regardlessofwhetheryouselecttoemailit.
No
(Disabled)
Where to send
Configuration
IfyouenabledemailingtheAutoConfigurationSavefile,
selecttherecipientthatyouwanttoautomaticallyreceive
theAutoConfigurationSavefileeachtimeitisgenerated.
Toconfiguremailusers,see
ConfigureMailUserson
page104.
Note: Ifyoudonotconfigureoneormoremailusers,you
cannotmakeselectionsforthisoption.
Blank
(Nomailusers
configured
—OR—
Nomailuser
selected)
For this setting... Do the following to change.... Default