Spectra T50e - Page 117

Chapter 4—Configuring the Library Backing Up the Library Configuration
August 2017 User Guide—Spectra T50e Library
118
7. ClickSelect.Thescreenrefreshestoshowthedetailsfortheutility.
8. ClickNextandselectwhethertosavetheconfigurationbackupfileto
USBortoemailittoapreviouslyconfiguredmailuser.
Figure 67 Read about the Save Library Configuration utility.
Figure 68 Select the destination for the configuration backup file.
Select... To.. .
USB
SavethelibraryconfigurationfiletotheUSBdeviceconnectedtoa USBporton
theLCM.Thebackupfileisstoredinafoldercalled
SavedConfigs\<date-time>,where<date-time>isthetimestampfor
whenthebackupwascreated.Thefoldercontainsmultipleconfigurationfiles
withtheformat
cnnnnnn.cfg,whereeachnisanumberbetween0and9.
Note: TheUSBoptionisonlyavailableifyouconnectaUSBdevicetothe
library’sUSBportbeforeyouaccesstheutilities.
[mail recipient]
Sendthelibraryconfigurationfileasazipfileattachedtoanemailaddressedto
apreviouslyconfiguredmailuser(see
ConfigureMailUsersonpage104).
Note: Donotsendthefiletoautosupport@spectralogic.comunlessSpectra
LogicTechnicalSupportspecificallyrequestedthefilefortroubleshooting.
Note: Do not use the
autosupport@spectralogic.com
address unless specifically
instructed to do so by Spectra
Logic Technical Support.