Spectra T50e - USING A USB DEVICE

Chapter 5—Operating the Library Monitoring Your Library
August 2017 User Guide—Spectra T50e Library
145
4. ClickDetailsnexttothedriveforwhichyouwanttoviewdetailed
information.TheDriveDetailsscreendisplays.
Notes:  TheinformationontheDriveDetailsscreendependsonthe
driveinterfacetypeandwhetherthedriveisconfiguredina
partition.
 TheinformationontheDriveDetailsscreenisasnapshotof
theinformationatthetimeyouclickedDetails.ClickPrevious
andthenclickDetails againtorefreshtheinformation.
Figure 89 The Drive Details screen (Fibre Channel shown).
This field... Shows...
<interface>LTO–
DRV<bay>
ThedriveidentifierassignedbytheBlueScalesoftware.SeeBlueScaleDrive
Identifiersonpage149fordetailedinformation.
Status WhetherornotadrivethatwasaddedtothelibrarythroughtheBlueScale
softwareispresent,missing,orimpaired.
Partition ThenameofthepartitiontowhichthedriveisassignedorNoneifthe driveis
notassignedtoapartition.
Connection  TheHostFibreChannelIDforaFibreChanneldrive.
 TheSCSIIDforaSCSIdrive.
Note: ThisfieldisnotpresentforSASdrives.