Spectra T50e - Page 168

To Next Page

To Previous Page

Chapter 6—Configuring and Managing Partitions Creating a Cleaning Partition

August 2017 User Guide—Spectra T50e Library

166

 Ifoneormorepartitionsarealreadycreated,theexistingpartitions

arelistedinalphabeticalorderonthePartitionsscreen.ClickNewto

createanewpartition.

Note: IftheNewbuttonisNOTdisplayed,thenallslotsinthelibrary

areallocatedortheexistingpartitionisconfiguredforStandard

Entry/Exitmode.Youneedtoeditanexistingpartitiontofreeup

slotsorchangetheEntry/Exitmodebeforeyoucancreatea

cleaningpartition.

3. OntheName&MediaTypescreen,enteranameforthepartitionand

selectLTO Cleaningasthemediatype.

Figure 101 Click New on the Partitions screen to begin

creating the cleaning partition.

Figure 102 Enter a name for the partition and select LTO

Cleaning to create a cleaning partition.

For this field... Do the following...

Name

Enteraunique,descriptivenametoidentifythepartitionasacleaning

partition.Namescanbeanylengthandcaninclude@‐_/.andthespace

character.Partitionnamesover32characterscauseascrollbartodisplayon

somescreensandarenotrecommended.

Note: Thedefaultnameforacleaningpartitionis“Cleaningn”,wherenisa

number.ThepartitionnameslistalphabeticallyinmanyoftheBlueScale

screens.Ifyouwantthecleaningpartitionstobelistedafterthestorage

partitions,precedethenamewitha“z”or“_”.

Media Type

Select LTO Cleaning tocreateacleaningpartition.

Other manuals for Spectra T50e