Spectra T50e - CREATING A STORAGE PARTITION

Chapter 6—Configuring and Managing Partitions Creating a Cleaning Partition
August 2017 User Guide—Spectra T50e Library
167
4. ClickNext.TheChambersscreendisplays.
5. Click– and+asrequiredtosetthenumberofstorageslotsassignedto
thecleaningpartition.
Note: Aminimumofoneslotmustbeassignedtothepartition.
6. ClickNext.TheSaveLibraryConfigurationscreendisplays.
Note: IfyouwanttosavetheconfigurationtoaUSBdevice,connect
thedrivetotheUSBportontheLCM(seeConnectaUSBDevice
totheLibraryonpage148)andallowtimeforthedeviceto
mountbeforecontinuing.
7. Selectwhetheryouwanttosavethecurrentlibraryconfiguration.
 Don’t Save Library Configuration—Abackupofthechangedlibrary
configurationisnotsaved.
 Save Library Configuration To(highlyrecommended)—Savesa
backupofthelibraryconfigurationtotheselecteddestination.
Usingthisoptionishighlyrecommendedtoensurethatyoucan
easilyrestorethelibraryconfiguration,ifnecessary.
Figure 103 Set the number of slots for the cleaning partition.
Figure 104 Select whether to save the updated library
configuration.