Spectra T50e - Page 190

Chapter 6—Configuring and Managing Partitions Modifying an Existing Partition
August 2017 User Guide—Spectra T50e Library
188
5. SelectConfiguration > PartitionstodisplaythePartitionsscreen.
6. ClickEditforthepartitionyouwanttomodify.TheName&Media
Typescreenforthepartitiondisplays.
7. TheName&MediaTypescreenisthebeginningofaseriesof
configurationscreens.Dependingonthetypeofpartitionyouare
modifying,followtheinstructionsforcreatingthepartitiontomodify
thepartition.
 Tomodifyacleaningpartition,seeCreatingaCleaningPartitionon
page165,
—OR—
 Tomodifyastoragepartition,seeCreatingaStoragePartitionon
page169.
Notes:  Youcannotchangethemediatypeselectedforthepartition.
 Ifyouloggedintotheencryptionfeature,youcanmodifythe
encryptionsettingsforthepartition(seeConfigure
Encryptiononpage180).
Figure 122 Click Edit for the partition you want to modify.
Figure 123 The Name and Media Type screen 
for a cleaning partition.
Figure 124 The Name and Media Type screen for a
storage partition.