Spectra T50e - Page 281

Chapter 9—Using Drive Lifecycle Management Monitoring Drive Health Using DLM
August 2017 User Guide—Spectra T50e Library
278
4. ClickDLMontheDriveDetailsscreentoviewadetailedDriveLifecycle
Managementreport.
Note: TheDLMbuttonontheDriveDetailsscreenisnotpresentif
MLMandDLMarenotenabled(seeEnableandConfigure
MLMPreScanandPostScanonpage177).
TheDriveLifecycleManagementscreenisdividedintofourpanes,
whicharedescribedinthefollowingtable.
This pane... Shows...
Drive health
overview
Thedriveidentifierandanystatusinformation.Thedrivehealthiconindicates
thedrive’soverallhealthatthetimethescreenwasdisplayed.
Summary of tapes Thebarcodelabelinformationandhealthinformationforthelast10cartridges
loadedintothedrive.Thehealthiconindicatesthecartridgehealthatthetime
thecartridgewasunloadedfromthedrive(TapeHealthatUnmount)andthe
currenthealthstatusstoredintheMLMdatabase(CurrentTapeHealth).Refer
tothetableon
page258ofChapter8–ConfiguringandUsingMediaLifecycle
Management,beginningonpage226fordescriptionsoftheiconsrelatedto
mediahealth.
Note: Depending onthedrive’shistory,thispanemaynothaveanyentries.
Figure 180 Check the drive health icon for the overall
health of the drive.
Figure 181 The Summary of tapes pane shows the
cartridge barcode label and health information.