Spectra T50e - CHAPTER 10 Encryption and Key Management; ENCRYPTION AND KEY MANAGEMENT OVERVIEW

Chapter 9—Using Drive Lifecycle Management Monitoring Drive Health Using DLM
August 2017 User Guide—Spectra T50e Library
279
5. TosavetheinformationontheDriveLifecycleManagementscreen,use
theSaveMLMDatabaseutilityasdescribedinBackUptheMLMand
DLMDatabasesonpage263.
6. Ifyoucorrectedaconditionthatchangedthedrive’shealthtoyellowor
red,clickReset HealthtoresetthedrivehealthtoGood(Green).Click
Continuetocompletetheresethealthprocess.
Notes:  Iftheconditionwasnottrulycorrected,thenexttapeload
setsthedrivehealthbacktothepreviousindication.
 Resettingthedrivehealthdeletesthedrive’sSummaryof
TapesandHistoryofTapesdata.
History of tapes Detailedinformationaboutthelast50cartridgesloadedintothedriveaswell
asanyTapeAlertsandSCDcodespostedbythedrivewhilethetapewas
loadedinthedrive.
Notes:
 Dependingonthedrive’shistorydrive,thispanemaynothaveanyentries.
 RefertothetapedrivedocumentationforinformationaboutTapeAlerts(see
LTOUltriumTapeDrivesonpage19).
This pane... Shows...
Figure 182 The History of tapes pane shows detailed
information about each of the individual tapes.