Spectra T50e - Deleting an Encryption Key from the Library

Chapter 10—Encryption and Key Management BlueScale Key Management
August 2017 User Guide—Spectra T50e Library
319
2. PlugtheUSBdevicecontainingtheexportedencryptionkeyyouwant
toimportintoaUSBportontheLCMandallowtimeforthedeviceto
mount.
Note: IfthekeywasexportedasM‐of‐Nshares,plugtheUSBdevice
containingoneofthesharesintotheLCM.
3. FromtheEncryptionConfigurationscreen,clickImport Key.
 IfyouselectedMulti‐UsermodeforProfessionalEditionandyou
didnotalreadyenterasecondencryptionuser password,youare
promptedtoenteranotherpassword.Enteroneoftheencryption
userpasswordsthatyoudidnotuseduringtheinitiallogin,then
clickNext.TheEncryptionKeyFilesSourcescreendisplays.
 Otherwise,theEncryptionKeyFilesSourcescreendisplays
immediately.
Note: Ifyouareaccessingthelibraryfromtheoperatorpanel,the
ImportKeySelectionscreendisplaysinsteadoftheEncryption
KeyFilesSourcescreen.
4. SelectImport key from USB,andthenclickNext.TheImportKey
Selectionscreendisplays.
Figure 209 Select Import key from USB to retrieve the key
file from the USB device.
Figure 210 Select the key you want to import.