Data Collection and Analysis 795
• Opening the Sensor Console context menu
• Viewing existing data
• Special steps for Data and Statistics
Collecting data in other applications
Use the Sensor Console to collect data using a sensor in another
TI-Nspire™ application.
To use Sensor Console with a sensor:
1. Open the application you want to use to capture the data.
Example: Graphs
2. Click
Insert > Sensor Console or click anywhere in the application
and press
Ctrl + D.
Handheld: Press b + Insert > Sensor Console or / + D.
3. Attach the sensor to use if not already attached. Wait a moment for
the Sensor Console area to appear active.
4. Click Collect Data > Start Collections or click .
5. Wait for the data set to end or stop the collection.
Computer: To stop collection:
Collect Data > Stop Collection or click
.
Handheld: To stop collection: Press
b and select Collect Data >
Stop Collection
or click .
6. Click Collect Data > Close Console or click .
The data collection is available for use in the current application.
Opening the Sensor Console application menu
The Sensor Console menus are a subset of the Vernier DataQuest™
application menus previously covered in this document.
Example Sensor Console area with the Gas Pressure sensor
attached.
To Next Page
Loading...
Need help?
General
