Tibbo EM1000 User Manual

99 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
Detailed Device Info
The information on various hardware faculties of the EM200 can be found in the
following topics:
· Ethernet Port Lines
· Serial Port and General-purpose I/O Lines
· Flash and EEPROM Memory
· LED Lines
· Power, Reset, and Mode Selection Lines
I/O pin assignment
Pin #
Function
Description
1
EG
Green Ethernet status LED control line.
2
EY
Yellow Ethernet status LED control line.
3
RX+
Ethernet port, positive line of the
differential input signal pair.
4
RX-
Ethernet port, negative line of the
differential input signal pair.
5
Vout
"Clean" power for the magnetics circuitry:
EM200C-02 devices: 3.3V
EM200C-04 devices: 1.8V
6
TX+
Ethernet port, positive line of the
differential output signal pair.
7
TX-
Ethernet port, negative line of the
differential output signal pair.
8
GPIO8
General-purpose I/O line 8.
9
GPIO7
General-purpose I/O line 7.

Tibbo EM1000 Specifications

General

Brand	Tibbo
Model	EM1000
Category	Control Unit
Language	English