464External Controllers
© Tibbo Technology Inc.
Think the above table should contain additional data? Do not just assume that you
know the answer — talk to Tibbo! Remember that the ultimate responsibility for all
decisions you make regarding the use and the mode of use of Tibbo products lies
with you, our Customer.
DS1206
Introduction
The DS1206 is a miniature BASIC-programmable controller designed primarily for
serial-over-IP and serial control applications.
The DS1206 features a multi-channel serial port. The device has a single DB9M
connector and is priced as a single-port product, yet it packs four independent
serial channels. Have no use for those DSR and DTR lines? Turn them into RX and TX
of an additional serial channel. Don't want CTS and RTS either? That's one more
channel! In total, there are 15 different configurations to choose from.
Another feature of the DS1206 is software-controlled power output on pin 9 of the
RS232 port, so you can power an attached serial device directly through the
DS1206. Alternatively, the DS1206 itself can be powered through this pin.
The DS1206 is fully supported by TIDE software and a dedicated DS1206 platform
that covers all hardware facilities of the device (see TIDE, TiOS, Tibbo BASIC, and
Tibbo C Manual). This product ships preloaded with a fully functional serial-over-IP
application. Written in Tibbo BASIC, the application is compatible with Tibbo Device
Server Toolkit software, comes with full source codes, and can be modified by the
user.
Hardware features
·
10/100Base-T, auto-MDIX Ethernet port.
·
3.5-channel RS232 port on a DB9M connector:
- TX, RX, RTS, CTS, DTR, DSR, DCD lines;
- Baudrates of up to 921,600bps;
- None/even/odd/mark/space parity modes;
- 7 or 8 bits/character;
- RTS/CTS and XON/XOFF flow control;
- Flexible mapping with 15 different options, such as:
- A single channel: RX, TX, CTS, RTS, DSR, and DTR lines;
- 3.5 channels: RX, TX, RX2, TX2, RX3, TX3, and RX4 lines;
To Next Page
Loading...
Need help?
General