488External Controllers
© Tibbo Technology Inc.
DC 10-18VDC (12VDC nominal)
Operating relative humidity
All specifications are subject to change without notice and are for reference only.
Tibbo assumes no responsibility for any errors in this Manual, and does not make
any commitment to update the information contained herein.
Think the above table should contain additional data? Do not just assume that you
know the answer — talk to Tibbo! Remember that the ultimate responsibility for all
decisions you make regarding the use and the mode of use of Tibbo products lies
with you, our Customer.
Sensors (Probes)
The following sensor families are currently being offered by Tibbo:
·
RS485 Modbus Sensors ("Bus Probes")
·
Cable Probes
RS485 Modbus Sensors ("Bus Probes")
BP#01 sensor shown
Bus Probes are a family of environment sensors with an RS485 interface. The Probes
communicate using standard Modbus RTU protocol.
At the moment, Tibbo offers four types of probes: ambient temperature sensor
(BP#01), ambient temperature and humidity sensor (BP#02), ambient light sensor
(BP#03), and 3-axis accelerometer (BP#04).
To Next Page
Loading...
Need help?
General