Tibbo EM1000 User Manual

525 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
w
2
Max
.
18.1
Board width
M
Min.
1.9
Mounting stand and tail height
t1
Aver
.
2.5
Mounting stand diameter
t2
Aver
.
1.5
Solder tail width
t3
Aver
.
0.25
Solder tail thickness
p
Aver
.
1.27
Connector pin pitch
s1
Aver
.
33.1
Distance from the face to the connector pins of the main connector
s2
Aver
.
22.2
Distance from the connector pins of the main connector to the
vertical centerline of solder tails
s3
Aver
.
26.2
5
Distance from the connector pins of the main connector to the
vertical centerline of mounting stands
s4
Aver
.
28.3
5
Distance from the connector pins of the main connector to the
connector pins of the additional connector
h1
Aver
.
17.5
Distance between the horizontal centerlines of mounting stands
h2
Aver
.
18.5
Distance between the horizontal centerlines of solder tails
Dimensions are for reference only. Tibbo assumes no responsibility for any errors in
this Manual, and does not make any commitment to update the information
contained herein.
Ordering Info and Specifications
The RJ203 device is only available in a single configuration and can be order as
"RJ203".
The RJ203 can also be ordered in combination with the EM203 (documented in the
"Serial-over-IP Solutions Manual") or EM1206 module. To receive the RJ203 and
EM203 pre-assembled together, please specify "RJ203+EM203" on your order. To
receive the RJ203 and EM1206 pre-assembled together, please specify
"RJ203+EM1206" on your order.
Specifications
Jack type
Standard RJ45 Ethernet jack
Magnetics type
10/100BaseT, designed to work with DAVICOM
DM9000B Ethernet controller
Operating temperature
-20 to +70 degrees C
Operating relative
humidity
10-90%
Mechanical dimensions
(excl. leads)
31.0x20.0x15.5 mm
Packaging
RJ203 devices and RJ203+EM1206 module
combination: tray, 30 modules/tray

Tibbo EM1000 Specifications

General

Brand	Tibbo
Model	EM1000
Category	Control Unit
Language	English