486External Controllers
© Tibbo Technology Inc.
All specifications are subject to change without notice and are for reference only.
Tibbo assumes no responsibility for any errors in this Manual, and does not make
any commitment to update the information contained herein.
Think the above table should contain additional data? Do not just assume that you
know the answer — talk to Tibbo! Remember that the ultimate responsibility for all
decisions you make regarding the use and the mode of use of Tibbo products lies
with you, our Customer.
DS10x5 (Digital I/O)
The DS10x5 BASIC-programmable controllers feature eight opto-isolated digital
inputs, six high-power relays, and one RS232/485 port. The DS1005 is based on the
NB1000 network board (Ethernet interface only), and the DS1015 is based on the
NB1010 network board (Ethernet + optional Wi-Fi + optional GPRS).
Read carefully the explanation about the type of antenna installed when
the DS1015 is ordered with Wi-Fi, GPRS, or Wi-Fi and GPRS options.
Follow these quick links to often needed information:
·
Right (network) side of the device:
- Power jack, terminals, and power regulator;
- Ethernet jack;
To Next Page
Loading...
Need help?
General