INFO
. . . .. . . ... .... .... .... ..... ..
Sievers TOC-R3 Operation and Maintenance Manual
DLM 95000-01 EN Rev. A 158 © Veolia 2023
Stream 1 Name
If desired, use this setting to change the Stream 1 Name.
Stream 2 Name
If desired, use this setting to change the Stream 2 Name. This function is only available
for Two-Stream enabled Analyzers.
Info
Use this screen to view details about the individual Analyzer; including the Model Type,
Serial Number, FAT Date, Installation Date, and Certification.
Figure 4-52: Menu → General → Info
Machine Configuration
Use this screen to view the current Analyzer configuration (including any optional
Detectors purchased), perform system Backups, Activate Options, and view the enabled
Analytical Methods, per stream.
The “NDIR Detector” and “NDIR Range” values are important for determining the
Analytical Range of the Analyzer. For more information, see “Typical NDIR Detector
Measuring Ranges” on page 43.
If an optional Detector has also been installed (either the ECD Detector for TNb
Detection or the PID Detector for POC/VOC Detection), it will be shown on this screen as
either “TNb Detector” or “PID Detector”. Use the “TNb Range” or “PID Range” value to
To Next Page
Loading...
Need help?
General