SYSTEM DESCRIPTION
Chapter 2
............
Sievers TOC-R3 Operation and Maintenance Manual
DLM 95000-01 EN Rev. A 31 © Veolia 2023
IMPORTANT
Avoid mounting the Analyzer in direct sunlight as it may overheat the unit.
Data cabling, if required, must be installed by a qualified technician. Use of a watertight cable
bushing is required.
Avoid installing the Analyzer where it may be subject to splashing fluids. The fluids may enter the
Analyzer through the cooling system openings, causing damage.
APPLICATIONS
• Wastewater
• Drinking Water
• Cooling Water
• De-icing Water
• Saline Water (Limit: 3-5% NaCl)
• Process Water
• Surface Water
• Boiler Feed Water
• Environmental Monitoring
ANALYZER HIGHLIGHTS
• High-temperature combustion 1,200 °C (2192 °F)
• No catalyst
• No moving parts – valve system
• NDIR Detection for CO
2
• Multiple NDIR Detection Ranges Available for CO
2
• Analytical Methods:
• Included Analytical Methods: NPOC, TC
• Purchasable Analytical Methods: TOCdiff / TIC, TNb, POC/VOC, TOCa
• Particles: < 2 mm
• Repeatability: ± 2 % End Of Detector Range
• Salt Tolerance: 3-5% NaCl
• Typical Cycle Time: TC ~ 1 min, NPOC ~ 3 min
1