UNLOCK THE ANALYZER
. . . .. . . ... .... .... .... ..... ..
Sievers TOC-R3 Operation and Maintenance Manual
DLM 95000-01 EN Rev. A 88 © Veolia 2023
Figure 3-20: Gas Cooler Unit and LED (View From Above)
STEP 11: SET THE LOCAL ANALYZER SETTINGS
Unlock the Analyzer
Unlock the Analyzer by selecting the Lock Icon in the bottom left corner and inputting the
default Machine PIN “1111
”. This pin can be changed at a later time.
If needed, consult “To Unlock the Analyzer Touchscreen” on page 104
.
For more information about changing the Machine PIN, see “Machine PIN” on page 157
.
Set the Local Analyzer Settings
From the Touchscreen, select the Menu button (or use a “swipe gesture” with your finger
to switch to the Menu screen).
Navigate to the following: Menu → General. From this screen you can set the local
Analyzer settings. Select the buttons below to adjust any of the following settings.
• System Settings: Set the Language, Dark Mode, Auto Lock (On or Off), Auto
Lock Duration (in minutes), and configure any Sample Stream Name(s), if desired.
► See “System Settings” on page 89
.
• Time/Date Settings: Set the local Time and Date.