Veolia Sievers TOC-R3 User Manual

MAINTENANCE
Chapter 6
............
Sievers TOC-R3 Operation and Maintenance Manual
DLM 95000-01 EN Rev. A 175 © Veolia 2023
Acid Preparation
1% Hydrochloric Acid (HCl)
Prepare this Acid for NPOC Mode. Important! Always add concentrated acid to water.
Do not add water to concentrated acid!
To prepare a 1% hydrochloric acid solution, fill a 1 L Class A volumetric flask half full with
DI water. Measure 22.55 mL of hydrochloric acid (concentrated, 37.5% acid, technical
grade) and transfer it into the prepared volumetric flask. Bring the flask to volume with DI
Water. Cap and invert to mix.
1% Phosphoric Acid (H
3
PO
4
)
Prepare this Acid for TOC by Difference Mode / IC Mode. Important! Always add
concentrated acid to water. Do not add water to concentrated acid!
To prepare a 1% phosphoric acid solution, fill a 1 L Class A volumetric flask half full with
DI water. Measure 7.05 mL of phosphoric acid (concentrated, 85% acid, technical grade)
TNb
• TOC • H
3
PO
4
(Phosphoric)
• TIC (IC) Not applicable. Primary and
Secondary Analytical Methods are
not compatible.
• NPOC
• HCl (Hydrochloric)
• TC
• No Acid Required
TOCa • NPOC • HCl (Hydrochloric)
Warning
Always follow the manufacturer’s instructions and SDS guidelines for
preparation, handling, and disposal of all standards, reagents, and
consumables.
When handling components that contain sample, standards, waste
solution, or reagents, always wear eye protection and gloves.
Table 6-2: Secondary Analytical Methods and Acid Type (Continued)
Secondary
Analytical
Method
Associated Primary
Analytical Method
Primary Analytical Method
Acid Type

Veolia Sievers TOC-R3 Specifications

General

Brand	Veolia
Model	Sievers TOC-R3
Category	Measuring Instruments
Language	English