Sievers TOC-R3 Operation and Maintenance Manual
DLM 95000-01 EN Rev. A 27 © Veolia 2023
Thermal paste has been applied to surfaces within the Gas Cooling Unit.
Always use proper PPE and consult the SDS guidelines for proper
handling.
Always follow the manufacturer’s instructions and SDS guidelines for
preparation, handling, and disposal of all standards, reagents, and
consumables.
When handling components that contain sample, standards, waste
solution, or reagents, always wear eye protection and gloves.
Avoid contact with high temperature components when hot and use
proper PPE.
The Analyzer contains glassware. Always handle with care to avoid
breakage. In the event of broken glass, use proper PPE and disposal
precautions.
Caution! Possible pinch point when accessing the furnace! Keep hands
away from the hinge!
To ensure proper operation and protect against injury, do not operate the
Analyzer with the covers off or the door open.
When cleaning the Analyzer, always apply liquid to the cloth directly, and
do not spray liquids directly on the Analyzer. Do not use water or cleaners
on the touchscreen, as water can damage or discolor the polarizer. Refer
to the Maintenance chapter for recommendations on cleaning the
touchscreen. Wipe away any condensation immediately.
To protect the Analyzer from damage, always drain the fluids from the
Analyzer prior to shipping.
This symbol on the instrument indicates that the product is China RoHS II
compliant.
Warnings
To Next Page
Loading...
Need help?
General