3-6 Phaser 6180 Color Laser Printer Service Manual
Error Messages and Codes
Error Message and Chain Link Code Summary
The Error Message Summary table lists possible errors, along with the
corresponding code, and page reference for the corrective procedure.
■ The Control Panel Message column shows the message as it appears on
the printer’s display when the error codes during normal operation.
■ The Chain Link column lists codes listed on the printer Error History
Report and the Control Panel.
■ The Go to Page column references the procedure related to the error.
Use this table to identify the proper procedure to correct the reported error.
Error Message and Chain Link Code Display
Chain Link
Code
Control Panel Message
Go to Page
Jam Errors
071-100 Jam at Tray 2 (Feeder 1 Jam) page 3-10
072-100 Jam at Tray 3 page 3-13
075-100 Jam at Tray 1 (MPT) page 3-18
077-900
077-901
Jam at Exit/Jam at Reg. Roll page 3-24
077-903 Jam at Tray 2 page 3-22
077-907 Jam at Duplexer page 3-29
Consumable/Routine Maintenance Errors
010-317 Insert Fuser page 3-32
010-351 Replace Fuser page 3-34
010-359 Fuser CRUM Error page 3-35
010-397 Fuser Error page 3-36
010-421 Ready Fuser Life page 3-38
093-423
093-424
093-425
093-426
Print Cartridge Near Life (Y/M/C/K) page 3-39
093-919
093-920
093-921
093-922
Check Print Cartridge (Y/M/C/K) page 3-40
093-925 Print Cartridge CRUM Error (K) page 3-44
093-926 Non-Xerox Toner Invalid (K) - (Print Cartridge
CRUM ID Error)
page 3-46
To Next Page
Loading...
