Xerox Phaser 6180 - Dispenser (C;M;Y;K) (PL5.1.12)

56 Phaser 6180 Color Laser Printer Service Manual
Service Parts Disassembly
Dispenser (C/M/Y/K) (PL5.1.12)
1. Remove the Rear Cover (page 8-11).
2. Remove the Left Side Cover (page 8-13).
3. Disconnect the 4 Dispenser Motor wiring harnesses.
4. Release the 2 hooks securing the Motor Harness Duct to the printer.
5. Slightly shift the Harness Motor Duct upward and release the convex
sections of the Harness Motor Duct from the printer. Place the 4
connectors through the hole of the Harness Motor Duct.
s6180-043