Xerox Phaser 6180 - Unfused Image

5-54 Phaser 6180 Color Laser Printer Service Manual
Print-Quality Troubleshooting
Unfused Image
The toner image is not completely fused to the paper. The image easily rubs
off.
Initial Actions
■ Check the paper transfer path.
■ Ensure there are no debris on the transfer path.
W
arn
i
ng
Ensure to wait for the Fuser to cool down before starting the procedure.
Troubleshooting Reference Table
Applicable Notes Example Print
■ Fuser, PL6.1.10
■ Print Cartridge (C/M/Y/K),
PL5.1.18-21)
■ MCU Board, PL9.1.20
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the paper condition. Is the
paper dry, recommended type, and
loaded in the correct position?
Go to step 2. Replace the
paper.
2 Check the Print Cartridge (C/M/Y/K)
for damages. Is the Print Cartridge
damaged?
Go to step 3. Replace the
Print Cartridge
(page 8-9).
ABCDE abcde 12345
s6180-330