92 Phaser 6180 Color Laser Printer Service Manual
Service Parts Disassembly
Controller Shield (PL9.1.25)
1. Remove the Rear Cover (page 8-11).
2. Remove the Right Side Cover (page 8-12).
3. Remove the Left Side Cover (page 8-13).
4. Remove 7 screws (6 mm) securing the Controller Shield.
Caution
When removing the Controller Shield, do not move the Controller Shield
too far from the printer, because it is connected with the wiring harnesses.
5. Move the Controller Shield toward the rear of the printer and release the
tab on the Controller Shield from the notch of the printer. Remove the
Controller Shield.
s6180-045
To Next Page
Loading...
