1-16 Phaser 6180 Color Laser Printer Service Manual
General Information
Operating Mode
Mode Condition Description
Running Mode The printer is under operating condition
such as running or recording.
Fusing The system keeps the operating
temperature.
Exposure The Laser Unit Motor runs at the running
speed.
Recording The system is under operating condition.
Cooling Fan The fan operates at high speed.
Control Panel
Operation
LCD - Backlight: On
LED - Ready LED is turned On.
Standby Mode The printer is under standby condition.
Fusing The system keeps the standby temperature.
Exposure The system is at Pause.
Recording The system is at Pause.
Cooling Fan The fan operates at low speed.
Control Panel
Operation
LCD - Backlight: On
LED: If printer is online, Ready LED is
turned On.
Power Saver
Mode
The printer enters into the Power Saver
mode to reduce power consumption when it
has not received print data for the specified
time.
Fusing The system is Off.
Exposure The system is at Pause.
Recording The system is at Pause.
Cooling Fan The system is Off.
Control Panel
Operation
LCD: Off, LCD Backlight: Off
LED: Power Saver LED is turned On.
Note: When the printer receives a print job or the Wake Up button is pressed, the
printer exits the Power Saver mode and enters the Ready mode.
To Next Page
Loading...
