Phaser 6180 Color Laser Printer Service Manual 1-17
General Information
First Print Output Time (FPOT)
First Print Output Time is defined as a time from when the engine receives a
Start signal in Ready state, until a single page is printed and delivered to the
output tray.
The following conditions are applied:
■ The Controller does not keep the print engine waiting
■ The printer is at Standby mode (Laser Unit Motor Off, Fuser Ready)
■ Paper is A size Short Edge Feed (SEF)
■ Process control time is not included
Mode FPOT (sec.)
Color As fast as 10.0
Mono As fast as 10.0
To Next Page
Loading...
