Xerox Phaser 6180 - Humidity;Temperature Sensor (PL9.1.19)

86 Phaser 6180 Color Laser Printer Service Manual
Service Parts Disassembly
Humidity/Temperature Sensor (PL9.1.19)
1. Remove the Rear Cover (page 8-11).
2. Remove the Right Side Cover (page 8-12).
3. Remove the Left Side Cover (page 8-13).
4. Remove the Controller Shield (page 8-92).
5. Release the Spacer (PL9.1.18) hook and remove the Humidity/
Temperature Sensor.
6. Disconnect the Humidity/Temperature Sensor connector P/J261.
R
ep
l
acemen
t
N
o
t
e
R
ep
l
acemen
t
N
o
t
e
Ensure to align the On/Off Power Switch mark with the SW Bracket
(PL9.1.37).
P/J261
s6180-046