Phaser 6180 Color Laser Printer Service Manual 8-15
Service Parts Disassembly
Front Cover (PL1.2.1)
1. Remove the Duplex Unit (page 8-94).
2. Remove the Rear Cover (page 8-11).
3. Remove the Right Side Cover (page 8-12).
4. Remove 1 screw (6 mm) securing the Ground Wire on the printer.
5. Disconnect the Front Cover connector P/J272 and the Control Panel
connector P/J2900 (PL1.2.15).
6. Release the Ground Wire and the wiring harness from the Drive Duct
(PL8.1.8).
s6180-030
P/J2900
P/J272
To Next Page
Loading...
