Xerox Phaser 6180 - Feeder Unit (PL3.2.1)

Phaser 6180 Color Laser Printer Service Manual 43
Service Parts Disassembly
Feeder Unit (PL3.2.1)
1. Remove Tray 2.
2. Remove the Rear Cover (page 8-11).
3. Remove the Right Side Cover (page 8-12).
4. Remove the Drive Assembly (page 8-76).
5. Remove the Registration Clutch (page 8-41).
6. Remove the Feed Clutch (page 8-42).
7. Remove the Tray 1 (MPT) Roll (page 8-37).
N
o
t
e
It is not necessary to remove the Tray 1 (MPT) No Paper Sensor
(PL3.1.15) and the Cover Sensor (PL3.1.16).
8. Remove 2 screws (10 mm) securing the MPT Chute (PL3.1.14) to the
printer.
9. Remove the MPT Chute from the printer.
s6180-027