Xerox Phaser 6180 - Right Side Cover (PL1.1.6)

8-12 Phaser 6180 Color Laser Printer Service Manual
Service Parts Disassembly
Right Side Cover (PL1.1.6)
1. Remove the Rear Cover (page 8-11).
2. Remove 3 screws (10 mm) securing the Right Side Cover.
3. Use a flat tip screwdriver to release the plastic tabs from the notches on
the top and rear sides of the printer frame.
4. Push the Right Side Cover at an angle toward the rear to remove it.
R
ep
l
acemen
t
N
o
t
e
R
ep
l
acemen
t
N
o
t
e
Insert the top and bottom tabs of the Right Side Cover at an angle in
order to fit the Right Side Cover in the correct position.
s6180-021
Replacement Note
Align the Right Side Cover
on the inside of the
Front Cover.
Lock Lever
Tab
Tabs