Xerox Phaser 6180 - No Paper Actuator (PL2.1.26)

28 Phaser 6180 Color Laser Printer Service Manual
Service Parts Disassembly
No Paper Actuator (PL2.1.26)
1. Remove Tray 2.
2. Press on the notches on the Actuator (PL2.1.24) to release the hooks.
Remove the Actuator from the Tray Handle (PL2.1.23).
3. Remove the No Paper Spring hooks (PL2.1.28) from the Actuator Holder
(PL2.1.25).
4. Expand the left and right Actuator Holder mounting sections and remove
the Shaft. Remove the No Paper Actuator together with the No Paper
Spring.
5. Remove the No Paper Spring from the No Paper Actuator.
R
ep
l
acemen
t
N
o
t
e
R
ep
l
acemen
t
N
o
t
e
Ensure the A/B Registration Spring Sensor is hooked securely onto
the A/B Actuator and the Registration Chute. Verify that the No Paper
Actuator fits inside the Bottom Plate hole.
s6180-183