Xerox Phaser 6180 - Parallel Port Error

3-104 Phaser 6180 Color Laser Printer Service Manual
Error Messages and Codes
Parallel Port Error
Parallel Port error occurs.
Applicable Chain Link
■ Chain Link 116-367: Parallel Port Error (IEEE 1284 Data Error)
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL9.1.27
■ Parallel Cable
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the Parallel cable connection. Is
the cable securely connected?
Go to step 2. Reconnect the
cable. Go to
step 2.
2 Does the error still occur? Replace the
Image
Processor Board
(page 8-89).
Complete.