Xerox Phaser 6180 - Tray 3 Feed Clutch (PL12.1.6)

Phaser 6180 Color Laser Printer Service Manual 101
Service Parts Disassembly
Tray 3 Feed Clutch (PL12.1.6)
1. Remove Tray 3 from the Optional 550-Sheet Feeder.
2. Remove the Tray 3 Right Cover (page 8-98).
3. Disconnect the Tray 3 Feed Clutch connector P/J4213.
4. Release the Clamp securing the Tray 3 Feed Clutch wiring harness to the
Feed Shaft (PL12.3.8).
5. Remove the E-ring securing the Tray 3 Feed Clutch to the Feed Shaft.
6. Remove the Tray 3 Feed Clutch from the Feed Shaft.
s6180-225
P/J4213