Xerox Phaser 6180 - Left Side Cover (PL1.1.7)

Phaser 6180 Color Laser Printer Service Manual 8-13
Service Parts Disassembly
Left Side Cover (PL1.1.7)
1. Remove the Rear Cover (page 8-11).
2. Remove 3 screws (10 mm) securing the Left Side Cover.
3. Use a flat tip screwdriver to release the plastic tabs from the notches on
the top and rear sides of the printer frame.
4. Push the Left Side Cover at an angle toward the rear to remove it.
R
ep
l
acemen
t
N
o
t
e
R
ep
l
acemen
t
N
o
t
e
Insert the top and bottom tabs of the Left Side Cover at an angle in
order to fit the Left Side Cover in the correct position.
s6180-037
Lock Lever
Tab