Xerox Phaser 6180 - Random Spots

5-42 Phaser 6180 Color Laser Printer Service Manual
Print-Quality Troubleshooting
Random Spots
There are spots of toner randomly scattered across the page.
Initial Actions
■ Check the paper transfer path.
■ Ensure there are no debris on the transfer path.
W
arn
i
ng
Ensure to wait for the Fuser to cool down before starting the procedure.
Troubleshooting Reference Table
Applicable Notes Example Print
■ Transfer Unit, PL4.1.1
■ Print Cartridge (C/M/Y/K),
PL5.1.18-21
■ Laser Unit, PL5.1.2
■ Fuser, PL6.1.10
■ MCU Board, PL9.1.20
■ Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check for spot’s regular intervals. Are
there any spots on the page?
Refer to “The
following table
lists the print-
quality defect
corrective
procedure, their
definition, and
the page where
each procedure
is provided.” on
page 5-23.
Go to step 2.
ABCDE abcde 12345
s6180-325