Xerox Phaser 6180 - Skew

Phaser 6180 Color Laser Printer Service Manual 5-49
Print-Quality Troubleshooting
Skew
The printed image is not parallel with both sides of the paper.
Initial Actions
■ Check the paper transfer path.
■ Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Notes Example Print
■ Tray 2 Retard (Separator) Roll,
PL2.1.7
■ Tray 1 (MPT) Feed Roll, PL3.1.10
■ Turn Roll, PL3.2.32
■ Feed Roll (Nudger Roll), PL3.2.53
■ Tray 2 Retard Roll, PL2.2.17
■ Tray 3 Feed Roll, PL12.1.9
■ Tray 3 Retard Roll, PL12.3.10
■ Duplex Unit, PL11.1.1
Troubleshooting Procedure Table
Step Action and Questions Yes No
1 Check the paper condition. Is the
paper dry, recommended type, and
loaded in the correct position?
Go to step 2. Replace the
paper.
2 Check the Front Cover Latch. Open and
close the Front Cover.
Does the error still occur?
Go to step 3. Complete.
3 Check the Transfer Unit for correct
installation. Reseat the Transfer Unit.
Does the error still occur?
Go to step 4. Complete.
ABCDE abcde
12345
s6180-328