Xerox Phaser 6180 - Top Cover (PL1.1.4)

8-14 Phaser 6180 Color Laser Printer Service Manual
Service Parts Disassembly
Top Cover (PL1.1.4)
1. Remove the Rear Cover (page 8-11).
2. Remove the Right Side Cover (page 8-12).
3. Remove the Left Side Cover (page 8-13).
4. Remove 5 screws (10 mm) securing the Cover.
5. Release the tabs from the holes on the left and right sides of the Top
Cover.
6. Lift the Top Cover to release the two notches in the front center and the
front left of the Top Cover.
7. Remove the Top Cover.
s6180-048