Xerox Phaser 6180 - Duplex Fan (PL11.1.25)

Phaser 6180 Color Laser Printer Service Manual 95
Service Parts Disassembly
Duplex Fan (PL11.1.25)
1. Remove the Transfer Unit (page 8-7).
2. Remove the Duplex Unit (page 8-94).
3. Remove the Duplex Board Cover (PL11.1.16).
4. Release the 4 hooks securing the Harness Chute Cover (PL11.1.24) and
remove the Harness Chute Cover.
5. Disconnect the Duplex Fan connector P/J427 located on top of the Duplex
Board.
6. Release the 2 Clamps securing the wiring harness of the Duplex Fan to
the Duplex Feeder and remove the wiring harness.
7. Remove 2 screws (10 mm) securing the Duplex Fan Bracket (PL11.1.22)
to the Duplex Feeder.
8. Remove the Duplex Fan Bracket together with the Duplex Fan from the
Duplex Feeder.
9. Remove 2 screws (10 mm) securing the Harness Fan Cover (PL11.1.23)
to the Duplex Fan Bracket. Release the wiring harness and remove the
Harness Fan Cover.
10. Release the 4 hooks securing the Duplex Fan to the Duplex Fan Bracket.
11. Remove the Duplex Fan.
R
ep
l
acemen
t
N
o
t
e
R
ep
l
acemen
t
N
o
t
e
When reinstalling the Duplex Fan, ensure to place the labeled surface
of the Duplex Fan toward the side of the Duplex Feeder.
P/J427
s6180-217
Label Side