3-76 Phaser 6180 Color Laser Printer Service Manual
Error Messages and Codes
Network Error
Failure occurred on the Image Processor Board.
Applicable Chain Link
■ Chain Link 116-350: Network Error (On Board Network Communication
Fail)
■ Chain Link 116-351: Network Error (On Board Network Ethernet BIST
Parity/RAM R/W Error)
■ Chain Link 116-352: Network Error (On Board Internal Loopback Error)
■ Chain Link 116-355: Network Error (On Board Network Fatal Error)
■ Chain Link 018-319: Network Error (On Board Network OS Error)
■ Chain Link 018-320: Network Error (On Board Network VxWorks Error)
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the Image Processor Board for
correct installation. Is the Image
Processor Board correctly installed?
Go to step 2. Reseat the
Image
Processor
Board. Go to
step 2.
2 Does the error still occur? Replace the
Image
Processor Board
(page 8-89).
Complete.
To Next Page
Loading...
