Phaser 6180 Color Laser Printer Service Manual 3-73
Error Messages and Codes
Invalid Job
Error occurs when the configuration of the printer does not match the printer
driver.
Applicable Chain Link
■ Chain Link 016-799: Invalid Job (Job Environment Violation)
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL9.1.27
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the paper size. Does the paper
meet the specifications?
Go to step 2. Replace the
paper.
2 Check the paper size setup on the
Control Panel: Menu > Tray Settings >
Paper Size.
Go to step 4. Go to step 3.
3 Set the paper size in the Control Panel
to match the paper in the tray. Does
the error still occur?
Replace the
Image
Processor Board
(page 8-89).
Complete.
4 Does the error still occur? Go to step 5. Complete.
To Next Page
Loading...
