Xerox Phaser 6180 - Page 250

4-16 Phaser 6180 Color Laser Printer Service Manual
General Troubleshooting
Cyan Toner
Motor
Cyan Toner Motor Tests the cyan Toner Motor.
Black Toner
Motor
Black Toner Motor Tests the black Toner Motor.
Regi Clutch Regi Clutch Tests the Registration Clutch.
Tray1 (MPT)
Turn Clutch
Tray1(MPT) Turn Clutch Tests the Tray 1 Turn Clutch.
Tray 1 (MPT)
Feed Solenoid
Tray1(MPT) Feed
Solenoid
Tests the Tray 1 Feed Solenoid.
Tray 2 Feed
Clutch
Tray 2 Feed Clutch Tests the Tray 2 Feed Clutch.
Tray 3 Feed
Clutch
Tray 3 Feed Clutch Tests the Tray 3 Feed Clutch.
Tray 3 Turn
Clutch
Tray 3 Turn Clutch Tests the Tray 3 Turn Clutch.
Duplex Clutch Duplex Clutch Tests the Duplex Clutch.
ADC (TCD)
Sensor
Solenoid
ADC (TCD) Sensor
Solenoid
Tests the ADC Sensor Solenoid.
ADC (TCD)
Sensor LED
ADC (TCD) Sensor LED Tests the ADC Sensor LED.
OHP Sensor
LED
OHP Sensor LED Tests the OHP Sensor LED.
Drum Erase
Lamp K
Drum Erase Lamp K Tests the black Erase Lamp.
Drum Erase
Lamp YMC
Drum Erase Lamp YMC Tests the yellow, magenta, and cyan
Erase Lamps.
Exit Clutch Exit Clutch Tests the Exit Clutch.
Duplex Fan Duplex Fan Tests the Duplex Fan.
NVM Settings <Press the Up or Down
button to move from one
item to another>
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
move to the execution
level>
Edits, saves, loads, and prints NVRAM
information.
Service Diagnostic Test Table (continued)
Test Control Panel Display Test Description