4-20 Phaser 6180 Color Laser Printer Service Manual
General Troubleshooting
Pixel Counter Pixel Counter
■ Y: nn.n
■ C: nn.n
■ M: nn.n
■ K: nn.n
<Press the Set or Cancel
button to move one level
up the menu>
Displays the ratio (% used) of the
number of pixel per C/M/Y/K counted
by the Controller to A4 size area except
4 mm area from the edge on the last
page print.
■ 100% = empty print cartridge
The value is rounded off to one decimal
place.
For B/W print, only K is displayed.
The ranges are from 0-100% for each
color (CMYK).
Configuration
(Do not use -
for
Development
Only)
Configuration
■ Dip Switch0
■ 00000000 *
■ Dip Switch1
■ 00000000 *
■ Dip Switch2
■ 00000000 *
■ Dip Switch3
■ 00000000 *
Operates the DIP switch on NVRAM of
the Controller.
Available values are 0 and 1.
Note: This information is initialized by
Clear All NVM.
Counter Type Counter Type
■ Type1*
■ Type2
■ Type3
■ Type4
<Press the Up or Down
button to change counter
type>
<Press the Set button to
save the setting>
<Press the Cancel button
to move one level up the
menu>
Sets counter type from 1-4.
Note: When the Counter Type has been
changed, an “*” is displayed next to
the text.
Service Diagnostic Test Table (continued)
Test Control Panel Display Test Description
To Next Page
Loading...
