Xerox Phaser 6180 - Page 271

Phaser 6180 Color Laser Printer Service Manual 4-37
General Troubleshooting
Tray 2 No Paper
1. Enter the Service Diagnostic menu (page 4-5).
2. Perform the Tray 2 No Paper test: Engine Diag > Sensor Test > Tray 2
No Paper.
3. Remove Tray 2.
4. Move the Actuator up and down while checking the information on the
Control Panel display. The Low and High values change from 0 up to 99.
5. Press the Cancel button to stop the Tray 2 No Paper test.
s6180-358
Control PanelActuator
Normal
Tray 2 No Paper
H-0
Tray 2 No Paper
L-0