Xerox Phaser 6180 - Page 279

Phaser 6180 Color Laser Printer Service Manual 4-45
General Troubleshooting
Tray 3 Feed Motor (FULL2/FULL1/HALF/LOW)
N
o
t
e
The rotational speed of the Motor is as follows:
■ LOW < HALF < FULL2 < FULL1
1. Enter the Service Diagnostic menu (page 4-5).
2. Remove Tray 3.
3. Remove the Tray 3 Left Cover (page 8-97).
4. Perform the Tray 3 Feed Motor (FULL2/FULL1/HALF/LOW) test: Engine
Diag > Motor Test > Tray 3 Feed Motor (FULL2/FULL1/HALF/LOW).
5. Verify that the Tray 3 Feed Motor is running.
6. Press the Cancel button to stop the Tray 3 Feed Motor test.
s6180-371
Tray 3 Feed Motor