Xerox Phaser 6180 - Page 348

5-30 Phaser 6180 Color Laser Printer Service Manual
Print-Quality Troubleshooting
4 Check the Transfer Unit for correct
installation. Reseat the Transfer Unit.
Does the image quality improve?
Complete. Go to step 5.
5 Check the wiring harness connectors
P/J12 and P/J151 between the Laser
Unit and the MCU Board.
Are the connectors securely
connected?
Go to step 6. Reconnect the
connectors.
Go to step 6.
6 Check the Print Cartridge (C/M/Y/K)
for correct installation. Reseat the
Print Cartridge.
Does the image quality improve?
Complete. Go to step 7.
7 Check the MCU Board for correct
installation. Reseat the MCU Board.
Does the image quality improve?
Complete. Go to step 8.
8 Check the Image Processor Board for
correct installation. Reseat the Image
Processor Board.
Does the image quality improve?
Complete. Go to step 9.
9 Check the HVPS for correct
installation. Reseat the HVPS.
Does the image quality improve?
Complete. Go to step 10.
10 Replace the Print Cartridge (page 8-9).
Does the image quality improve?
Complete. Go to step 11.
11 Replace the Laser Unit (page 8-50).
Does the image quality improve?
Complete. Replace the
Image
Processor
Board
(page 8-89).
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No