Phaser 6280 Color Laser Printer Service Manual 5-25
Print-Quality Troubleshooting
4 1. Check the Transfer Unit for correct
installation. Reseat the Transfer Unit
(page 8-8).
2.Does the image quality improve?
Complete. Go to step 5.
5 1. Check the laser beam path.
2.Are there any debris between the
Laser Unit and Transfer Unit?
Remove the
debris.
Go to step 6.
6 1. Check the Print Cartridge (C/M/Y/K)
for correct installation. Reseat the
Print Cartridge (page 8-10).
2.Does the image quality improve?
Complete. Go to step 7.
7 1. Perform Yellow/Magenta/Cyan/Black
Toner Motor test (Yellow, page 4-47;
Magenta, page 4-48; Cyan,
page 4-49; Black, page 4-50):
Service Mode > Engine Diag >
Motor Test > Yellow/Magenta/
Cyan/Black Toner Motor.
2.Does the Dispenser Assembly rotate
smoothly?
Go to step 8. Replace the
MCU Board
(
page 8-86).
If not, replace
the Dispenser
Assembly
(page 8-56).
8 1. Check the MCU Board for correct
installation. Reseat the MCU Board
(page 8-86).
2.Does the image quality improve?
Complete. Go to step 9.
9 1. Check the Image Processor Board
for correct installation. Reseat the
Image Processor Board
(page 8-87).
2.Does the image quality improve?
Complete. Go to step 10.
10 1. Check the HVPS for correct
installation. Reseat the HVPS
(page 8-61).
2.Does the image quality improve?
Complete. Go to step 11.
11 1. Replace the Print Cartridge
(page 8-10).
2.Does the image quality improve?
Complete. Go to step 12.
12 1. Replace the Laser Unit (page 8-50).
2.Does the image quality improve?
Complete. Replace the
Image
Processor
Board
(
page 8-87).
Troubleshooting Procedure Table (continued)
Step Actions and Questions Yes No
To Next Page
Loading...
Need help?
General
